A Few Tips on Winterizing Your Home: Guest Post by Jodi Marks

Snow covered home

Old Man Winter is headed our way. But don’t worry: plastics can make it easy to winterize your home. Plastic insulation and caulk keep the cold, drafty air at bay while saving you money on your monthly heating bill.

Winterize Your Attic with Plastic Foam Insulation

Looking for ways to winterize your home, but don’t know where to begin? I always recommend starting at the most typical place warm air escapes to the outside: your attic. Making sure you have adequate insulation is very important in winter proofing your home. There are many types of extremely effective plastic foam insulation – spray polyurethane foam, polystyrene and polyiso panels, and more – that can help winter proof your home and save you a lot of money on those heating bills!

Winterize Doors and Windows with Plastic Caulk & Sealant

Another area where warm air escapes is your doors and windows. Just adding a simple bead of silicone plastic caulking around the inside and outside of their frames can greatly reduce the amount of warm air that slips away. Adding plastic foam sealant which expands to fill cracks (available in easy-to-use cans) or plastic weather stripping around the inside of the doorframe is yet another way to stop airflow.

Consider Replacing Doors & Windows with Modern Vinyl Plastic

If your doors or windows need to be replaced, modern vinyl plastic windows and patio doors are fairly inexpensive and do a great job of keeping cold air outside.

Remember to Winterize Smaller Openings, Too

Another place where warm air escapes—but one you might not think of—is at your wall switches and outlets. You can winterize these small openings by purchasing inexpensive plastic foam insulation sheets that fit tightly around the hardware when you remove the plate cover.

Another frequently overlooked place to seal up: around your water bibs outside. Sealing those gaps with a can of insulating plastic foam sealant can help keep the cold air out of your crawl space or basement. Also check the spot where your dryer vent exits to the exterior. You can apply more plastic sealant around the vent to ensure that no warm air finds its way out there.

So, as you can see, just a few simple winter proofing tips can really add up to great savings this winter. And let’s not forget, savings in the winter means savings in the summer, too!